Company donations

Tel.: +45 36 44 24 44

E-mail: info@aagechristensen.dk

+45 36 44 24 44

Send mail

Supply of technical components for the industry ✔ - Consulting engineer ✔ - Service and maintenance of all equipment ✔

Centrifuges for many different purposes

Martin Birch

Product specialist

E-mail: mbj@aagechristensen.dk

Mobile: +45 40 18 94 98

Gypsum centrifuges

Horizontal centrifuges

Pusher centrifuges

Vertical scraper centrifuges

Vertical and horizontal centrifuges for the industry

We supply many different types of Ferrum centrifuges. See our wide range of centrifuges below.

Gypsum centrifuges

These centrifuges are used for washing and separation of the gypsum generated by flue gas desulphurization (FGD processes).

See the range of gipsum centrifuges here

Horizontal centrifuges

Unlike vertical machines, process room and drive are totally separated in horizontal scraper centrifuges.

The square process housing provides all inspection possibilities playing an important role for the user when working with pharma centrifuges in mono- as well as multifunction plants.

The large inspection doors of the housing allow access to the filtrate outlet and the outer centrifuge basket without first having to open the front door and remove the connected process piping. Opening the front door gives access to all parts in contact with the product and thereby possibility of efficient control, CIP or exchange of filter medium in case of product change.

Horizontal scraper centrifuges provide a number of advantages compared with vertical machines, a.o. possibility of higher centrifugal force and thus lower residual humidity and charge times.

We offer products from the company Ferrum which manufactures the horizontal scraper centrifuges in chemical or pharmaceutical versions.

See the range of horizontal centrifuges here

Pusher centrifuges for large capacities

Pusher centrifuges are continuously working filter centrifuges for large capacities and with possibility of counterflow cake washing. For optimum yield of the pusher centrifuges the particles must have an average size of approx. 50 µm which is the smallest gap width in the mesh.

See the range of pusher centrifuges here

Vertical Scraper Centrifuges

Vertical scraper centrifuges are manufactured in two main types depending on the solid discharge method:

Bottom discharge
Top discharge

Bottom discharge is especially suited for separation of intermediate products and operation in a completely closed system. The discharge can be done by automatic scraping or extraction of the filter cloth. The advantage of the pneumatic system after scraping off the solids is that the residual layer can be completely removed and consequently will not contaminate the next charge.

The machines can be delivered with CIP and SIP systems and according to latest GMP guidelines.

See the range of vertical scraper centrifuges here

Whichever centrifuge you need, we can help you. We can advise and guide you to the right solution. All you need to do is call us on +45 36 44 24 44 and we will help you.